MUSTANG INSULATOR, MOTOR MOUNT, POLYURETHANE, PROTHANE, RED, PAIR, ** ALL 1967 AND 68-70 CONVERTIBLES THIS MOUNT WILL RAISE THE MOTOR APPROXIMATELY 1/2 INCH DUE TO SPECIFIC SUPPORTS**
MUSTANG MOTOR MOUNT SET, ADJUSTABLE, CUSTOM STOCK HEIGHT, ZINC PLATED STEEL, GRADE 8 HARDWARE AND POLYURETHANE BUSHINGS, ALLOWS FOR 3 1/2 INCH FORE / AFT ADJUSTMENT AND 1 INCH SIDE ADJUSTMENT FOR TRANSMISSION AND / OR HEADER CLEARANCES
MUSTANG MOTOR MOUNT SET, ADJUSTABLE, CUSTOM 1/2 INCH LOWER, ZINC PLATED STEEL, GRADE 8 HARDWARE AND POLYURETHANE BUSHINGS, ALLOWS FOR 3 1/2 INCH FORE / AFT ADJUSTMENT AND 1 INCH SIDE ADJUSTMENT FOR TRANSMISSION AND/ OR HEADER CLEARANCES
MUSTANG MOTOR MOUNT SET, ADJUSTABLE, CUSTOM COMBINED STANDARD HEIGHT AND 1/2 INCH LOWER, ZINC PLATED STEEL, GRADE 8 HARDWARE AND POLYURETHANE BUSHINGS, ALLOWS FOR 3 1/2 INCH FORE / AFT ADJUSTMENT AND 1 INCH SIDE ADJUSTMENT FOR TRANSMISSION
NPD California 1376 Walter St. #1 Ventura, CA 93003 ~ Sales ~ 805-654-0468 ~ Toll-Free ~ 800-235-3445 ~ Fax ~ 805-654-0826
National Parts Depot offers restorers and modifiers the fastest, lowest cost parts delivery.Call toll-free, 24-hours a day, 7-days a week!
Click on the location nearest you for more information. At the heart of speedy service are four strategically-located, fully-stocked warehouses.
Whatever you need, we likely have it, in-stock, and ready to ship. Call us today and find out for yourself why National Parts Depot
is the only choice for best Quality, Service, Speed, and Integrity.
Thank you for considering National Parts Depot for your supplier of great restoration parts and accessories. Providing Mustang Parts, Fox Body Mustang Parts, Camaro Parts, Chevelle Parts, Firebird Parts, Trans Am Parts, GTO Parts, Thunderbird Parts, Ford Truck Parts, El Camino Parts & more
Because we have such a huge selection of products, help us narrow down the results.
Core charges do not reflect the value of the part, they are an incentive to return the part to us. Junk parts sent as cores cannot be returned and will not receive core credit.
Core returnability will be determined by the remanufacturer and/or NPD®
Returned core must be rebuild-able.
No broken or missing parts, cracked cases, deeply grooved surfaces etc.
Moveable items must not be frozen, locked or rusted solid.
No cases with torch cuts.
No welded or bent shafts, ears etc.
Shafts, splines, keyways & threads must be good.
No disassembled cores credited.
Returned core must be same part as rebuilt unit purchased.
Returned core must be returned in same box as rebuilt unit purchased.
Drain all fluids prior to return and wrap in plastic to prevent leakage.
