ADJUSTING SLEEVE, Tie Rod, Professional grade good replacement by Elgin, 11/16 inch-18 thread
NPD Part Number : 3310-1 Manufacturer Reference #'s: ES2004S (K), C0AA-3310-A, C2AA-3310-B, ES2004S
1965-1966 MUSTANG 170, 200, P/S, RH AND LH
1965-1966 MUSTANG 260, 289, M/S, RH AND LH
1965-1966 MUSTANG 260, 289, P/S, RH
1967-1973 MUSTANG
1967-1973 COUGAR RH OR LH
1963-1965 FALCON 8 CYL., RH OR LH
1966-1970 FALCON (BEFORE 1/1/70), RH OR LH
1964-1965 FAIRLANE P/S
1966-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
1955-1957 TBIRD
1970-1981 CAMARO RH AND LH
1971-1977 CHEVELLE CHEVELLE, EL CAMINO AND MALIBU, RH AND LH
1969-1981 FIREBIRD RH AND LH
1975-1979 NOVA RH OR LH
1971-1973 TEMPEST GTO, LEMANS AND T-37, RH AND LH
1974-1977 TEMPEST LEMANS, RH AND LH
1971-1998 CHEVY TRUCK 1/2 TON, 2WD
1988-1998 CHEVY TRUCK 1/2 TON, 4WD
1971-1977 CUTLASS RH OR LH
1971-1972 SKYLARK RH OR LH
1971-1977 MONTE CARLO RH OR LH
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Excellent quality, Perfect fit.
Submited on October 31, 2018 by James C.
YES I would recommend this product.
Quality
Value
These should work well on my 71 Mustang. I'll be installing these next week and I believe they are of good quality after doing an inspection of the parts.
Submited on November 13, 2018 by Scott S.
YES I would recommend this product.
Quality
Value
No issues. Turns easy with new tie rods.
Submited on April 06, 2019 by Brad A.
YES I would recommend this product.
Quality
Value
Fit just like stock and saved me the time of cleaning up the original piece before installing. With all new tie rods, allowed me to match the lengths before installations so the alignment is pretty close to start with.
Submited on April 30, 2019 by Henry L.
YES I would recommend this product.
Quality
Value
Very nice quality and way better than the original ones on the car. For the money, they can't be beat.
Submited on July 11, 2019 by Marty T.
YES I would recommend this product.
Quality
Value
Bought these for a 68 Mustang. These are very tight on the tie rods and were very hard to adjust compared to the ones I had on there previously. Also note, not USA made.
Submited on September 23, 2019 by Drake R.
YES I would recommend this product.
Quality
Value
Get the Moog name brand
Submited on July 24, 2020 by James W.
YES I would recommend this product.
Quality
Value
This tie rod adjusting sleeve is not threaded all the way in, so does not have enough adjustment, can't use it, went in the trash. Would not buy this sleeve.
Submited on August 02, 2020 by Rod P.
Quality
Value
These sleeves just aren't that good. The tie rods don't screw in all the way and leaves an extra 2" total extra length. The extra length prevented me from fitting onto the center link. I ended up purchasing Moog sleeves, which worked great.
Submited on August 18, 2020 by Christopher T.
Quality
Value
worked and fit perfect
Submited on February 24, 2021 by Robert K.
YES I would recommend this product.
Quality
Value
well made, replaced the original perfectly
Submited on October 06, 2021 by William M.
YES I would recommend this product.
Quality
Value
These sleeves look great and the anti-corrosion coating is quite durable. However, I tried 6 different sleeves and none of them were threaded deep enough to allow me to adjust the toe-in properly. So much so, that I had over 2" of toe-in. I bought the Moog ES2004S branded sleeves instead and they were perfect.
Submited on November 30, 2021 by Jason C.
Quality
Value
In Stock!