BOOSTER ASSY, New, replacement style, 7.5 inch diaphragm, booster only no master cylinder, ** no painted black like original **, Use only to replace factory power brake booster, 5 hole (4 studs on booster and 1 bolt) firewall mounting pattern (one stud does not mount through pedal support), See 2005-2AK, 2005-3AK, 2005-4AK for mounting kit options,
NPD Part Number : 2005-16A Manufacturer Reference #'s: 2005-16A (PB replmt),
1967-1969 MUSTANG FACTORY POWER BRAKES, ** WILL NOT FIT 390, 428 WITH SOME TALL VALVE COVERS **, 70 HAS A STRAIGHT PEDAL MOUNTING HOLE
1967-1969 COUGAR FACTORY POWER BRAKES, ** WILL NOT FIT 390, 428 WITH SOME TALL VALVE COVERS **, 70 HAS A STRAIGHT PEDAL MOUNTING HOLE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Good fit and works great.
Submitted on August 02, 2020 by Brian G.
YES I would recommend this product.
Quality
Value
This did not fit my San Jose built 69 Mach 1, this booster does not use the original mounting spacer/bracket so the metal portion of the snout of the booster must go thru the firewall, the hole in my firewall was 1/4” too small. If I tried to enlarge the hole it would have interfered with the brake pedal support bracket. Also, pushrod length (booster mounting surface to pushrod eye center) to the brake pedal was 0.25” too long, didn’t do the math but would caused a much higher than normal pedal
Submitted on May 03, 2021 by Paul W.
Quality
Value
Out of Stock