CABLE CLUTCH LINKAGE CONVERSION KIT, If you are going to install a modern Tremec T-5, TK series or T56 trans you might want to consider upgrading the old loose feeling rod and bellcrank clutch linkage with an easy, smooth feeling modern style cable clutch setup, These kits are installed in less than an hour with basic hand tools, They feature: bolt-in design, firewall reinforcement bracket that connects the booster into the cable system to minimize firewall flex, Support plate is equipped with a “tools free” adjustment that can be adjusted on the fly. Cable is protected with a heat shield near the exhaust system, They will work with the stock T-5 & TK bellhousings or most aftermarket scattershields with a pull style lever/pivot, Best of all the kit is backed with the manufacturers limited lifetime warranty,
NPD Part Number : 7K553-1B Manufacturer Reference #'s: MD-6566M-CC,
0-0 MUSTANG REQUIRES BELLHOUSING THAT USES PULL STYLE RELEASE LEVER 7515-10
1965-1966 MUSTANG W/ 5 SPEED TRANSMISSION CONVERSION AND 5 SPEED BELLHOUSING OR T56
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Quality parts. Good fit. It seemed a bit pricey . The cable is bare (no sheathing). So the feel is a bit 'gravelly'.
Submitted on December 26, 2020 by David S.
YES I would recommend this product.
Quality
Value
Submitted on March 10, 2022 by Adam F.
YES I would recommend this product.
Quality
Value
looks like it will work an it came fast Thanks
Submitted on November 29, 2022 by Rick W.
YES I would recommend this product.
Quality
Value
In Stock!
