DISTRIBUTION BLOCK, Custom, brass, distribution only, this is not a proportioning valve, 2 inlet and 3 outlet ports, OE styled, An excellent addition for 65-66 drum brake dual bowl master cylinder conversions, Other uses as well
Manufacturer Reference #'s: C5ZZ-2B257-A,
Product Instructions and Additional Info:
2b075-3a_diagram1965-1973 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1964-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
1948-1979 F1-F350
1980-1996 F100-F350
1966-1996 BRONCO
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
My 70 Boss application. The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine. Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine Plan on doing work when you order this product it is not a boat up and go and you may have to check the manufacturers quality of work.
Submited on August 28, 2019 by Robert C.
YES I would recommend this product.
Quality
Value
My 70 Boss application. The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine. Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine Plan on doing work when you order this product it is not a boat up and go and you may have to check the manufacturers quality of work.
Submited on August 29, 2019 by Robert C.
YES I would recommend this product.
Quality
Value