DISTRIBUTION BLOCK, Custom, *** GOTO 2B091-20AA or 2B075-2A ***, brass, distribution only, this is not a proportioning valve, 2 inlet and 3 outlet ports, OE styled, A great choice for converting 65-66 single bowl master cylinder to dual bowl and other uses as well, Has 3/8 inch-24 brake warning switch threads,
NPD Part Number : 2B075-3A Manufacturer Reference #'s: C5ZZ-2B257-A,
Product Instructions and Additional Info:
Distribution Block Diagram1965-1973 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70), AS ACCESSORY
1964-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON, AS ACCESSORY
1948-1979 F1-F350
1980-1996 F100-F350
1966-1996 BRONCO
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
My 70 Boss application. The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine. Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine Plan on doing work when you order this product it is not a boat up and go and you may have to check the manufacturers quality of work.
Submitted on August 28, 2019 by Robert C.
YES I would recommend this product.
Quality
Value
My 70 Boss application. The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install The mounting bracket to the firewall was mounted backwards I had to pinch the brass pry off the bracket flip the block re-pinch the brass and then install Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine. Then the bottom fitting plug was leaking opened it up spring Mounted upside down damaged internal rubber seal replaced reinstalled works fine Plan on doing work when you order this product it is not a boat up and go and you may have to check the manufacturers quality of work.
Submitted on August 29, 2019 by Robert C.
YES I would recommend this product.
Quality
Value
Very helpful with information to assure the right product.
Submitted on April 30, 2021 by Michael K.
YES I would recommend this product.
Quality
Value
Submitted on August 28, 2021 by Gary c.
YES I would recommend this product.
Quality
Value
The bracket is on the wrong side. I got a used one on eBay that was perfect. For the amount of money it costs, your customers shouldn’t have to re-design the part.
Submitted on June 09, 2022 by Ray r.
Quality
Value
Mounting bracket was in opposite side of original but I relocated block on the inner fender well near master cylinder. I had to fabricate a different mounting system so the bracket worked for my application
Submitted on July 24, 2022 by Ed f.
YES I would recommend this product.
Quality
Value
In Stock!