National Parts Depot
Search ...

FLYWHEEL, MANUAL TRANSMISSION


Full Description
FLYWHEEL, MANUAL TRANSMISSION
Item # 6375-22A
MPN # 6375-22A
Brand: RAM Clutches

$349.17
In Stock!




In Store Availability
FL
NC
MI
CA
Description

FLYWHEEL, Manual Transmission, 50 ounce imbalance, 157 tooth, billet aluminum is SFI 1.1, fits 10 inch or 10.5 inch long style pressure plate or 10.5 inch diaphragm style pressure plate, 14 lbs, ** see also 6375-1A for steel **, aluminum is significantly lighter and allows the engine to rev faster putting you into the power band quicker, See 6379-1, T-6379-2A for mounting kit options, The flywheel is the foundation of the clutch system, and because it is an energy storage device, also determines the amount of power available to launch the car, A heavy flywheel stores more energy as it spins than a light flywheel. If your engine and gearing combination requires more power or inertia to make the car launch without bogging the motor, you will want a heavier flywheel, Keep in mind, though, that a heavier flywheel will be slower to accelerate through the gears, A lighter flywheel creates less inertia at launch, but will accelerate quicker through the gears, In order to effectively use a lighter flywheel, you must consider the car weight, operating RPM of the engine, and most importantly, the gearing, Too little gear will cause the engine to nose over or ‘bog’ on launch, The choice for most all out competition vehicles, RAM billet aluminum flywheels are CNC machined from certified materials and exceed SFI standards, A key feature of a RAM aluminum flywheel is the ¼ inch steel friction insert*, A well tuned competition clutch system has a predetermined amount of slippage at launch and on the gear changes, The flywheel insert must have enough mass to absorb the heat generated by slippage without distortion; ensuring maximum clutch life and consistent performance, Thinner inserts can warp and lift causing uneven engagement across the clutch disc. The thicker insert remains flatter and dissipates the heat better, Each flywheel is precision ground after the steel insert is installed to ensure the friction surface is parallel with the crankshaft flange for minimum runout and to provide the optimum mating surface for your choice of clutch disc,

NPD Part Number : 6375-22A
Manufacturer Reference #'s: RAM 2525,

Vehicle Information

Year-Range (bold)      Model (bold)      Fits/Applications

1965-1968 MUSTANG W/ 81-UP 5.0L CONVERSION, M/T

1983-1985 MUSTANG 5.0L, M/T, IF CONVERTED TO 10.5 INCH DIAPHRAGM STYLE CLUTCH

1986-1993 MUSTANG 5.0L, M/T

1967-1968 COUGAR W/ 81-UP 5.0L CONVERSION, M/T

1963-1967 FALCON W/ 81-UP 5.0L CONVERSION, M/T

1964-1964 FAIRLANE W/ 81-UP 5.0L CONVERSION, M/T

1981-1996 F100-F350 5.0L, M/T

1981-1996 BRONCO 5.0L, M/T

WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Reviews

0 Reviews
 
Write a Review