FUEL LINE, TANK TO PUMP

FUEL LINE, Tank to Pump, carbon steel, 3/8 inch diameter, 2 piece line, See 9369-2K for apron grommet and 380374-S, 358381-S2 for fuel line clip options, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a “galvanized” type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Concours approved, Stainless steel lines have an “S” at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard,  In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours,  Classic Tube does not use Aluminized tubing, Zinc plated or the Off-Shore tubing that the other manufacturers use and have the finishes that people dislike,

NPD Part Number : 9369-32A
Manufacturer Reference #'s: Classic Tube MUF1010-OE,