Factory color. x SMD bulbs are 3-4 times brighter than a stock incandescent bulb with less heat. Dash rheostat will function to some extent in most cases (there are a lot of variables that could effect this). “5x” bulbs have 5 diodes in a cluster and are only included for dash illumination. Standard single diode LED bulbs are used elsewhere. “Brighter than stock incandescent bulb” claim is based on a measure of lumens between a stock incandescent bulb and an LED bulb. How much actual light makes it to the dash face is dependent on many factors other than just the bulb lumen output. This kit does not require a special bulb for the single turn signal indicator. Bulbs used in this kit have built in bridge rectifiers that negates the need for the special bulb in that position.
Note: bulb fit can be an issue with 65-67 kits due to the steel stamped bulb bases and the inconsistencies of the stamped steel bulb sockets. Strict attention to the installation instructions is highly recommended.
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1964 (64), 1965 (65)
Above years shown are used for searches and are not application listings.
NPD Part Number : 13464-1DK Manufacturer Reference #'s: FC-6566FM-EX2,
1965-1966 MUSTANG FOR USE WITH STOCK BLUE GREEN DIFFUSER
1964-1965 FALCON FOR USE WITH STOCK BLUE GREEN DIFFUSER
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
More visible than factory tungsten bulbs. Good color with replacing blue filters. don't dim well, but that could be my light switch i guess. Didn't like that the bulbs were NOT the correct size. had to cut the springs and add bushings to make it fit. Likely would not have used these if i knew that beforehand. all in all, it does what it said though.
Submitted on August 21, 2019 by David B.
YES I would recommend this product.
Quality
Value
I would not recommend these because you have to cut the springs to make them work
Submitted on April 05, 2020 by Thomas H.
Quality
Value
In Stock!
