O-RINGS, INTAKE MANIFOLD INTERCOOLER TO HOUSING CONNECTOR, ORIGINAL N802927-S, THESE O-RINGS ARE LOCATED ON THE CONNECTOR TUBES THAT GO INTO THE INTERCOOLER AS WELL AS THE FRONT SUPPLY HOUSING, 2 REQD PER TUBE, 4 REQD PER CAR
These O-rings are located on the connectors that install into the intercooler as well as the front supply housings. Each connector as two O-rings one on each end and there are a total of four O-rings. It is recommend by Ford that each time the connectors are removed that you replace the O-rings with new units to ensure that you have no coolant leaks. So if you are working on or replacing your supercharger and removal of the intercooler is required these O-rings are a must need part.
Restoration Note:
When removing the front supply housing a minimum of two O-rings will be required that go into the intercooler body. You do not need to remove the connectors from the front supply housing to replace those O-rings but not doing so may create a coolant leak so it is recommend by Ford that you replace all four O-rings. A new front supply gasket will be needed as well. See note below!
Note:
If you are need a new front supply housing gasket NPD has you covered. See M-9L438-146 for factory original gasket.
Ford Mustang Years:
2003 (03), 2004 (04)
NPD Part Number : N802927-S Manufacturer Reference #'s: N802927-S
2003-2004 MUSTANG COBRA W/ 4.6L S/C DOHC
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
