14:1 quick ratio. This conversion kit offers the convenience and compactness of the 71-73 style system by having all the power steering components built into the steering box making the conversion from manual steering to power extremely easy. The kits are simple to install and include all necessary parts except where noted. Requires 2 sheave crank and water pump pulleys if your car has only single sheave. M/T cars will require either a cable or hydraulic clutch conversion. Customer will need to supply needed pulleys, belts and refrigerant. Installation reqs cutting steering shaft and column. Welded steering components may not be legal in some countries outside the U.S.. P/S kits utilize existing pump & brackets. M/S kits include new Saginaw pump & brackets. The M/S kits can be used as an upgrade to existing P/S cars as the Saginaw pumps included in the M/S kits develop more pressure that is necessary for low RPM effectiveness not present in the factory Ford pumps. You must convert to manual steering linkage or 3A163-2A in order to use this option. Installation on a 65-67 requires cutting of steering column tube and shaft. Customer will need to supply needed pulleys, belts and refrigerant. Will fit cars converted with 81-95 5.0L and 5.8L engines with use of that engines Power Steering pump and fabricated Power Steering hoses. Welded steering components may not be legal in some country’s outside the U.S. Does not include pump or pump brackets.
Additional parts may be needed for installation:
For original long steering shaft box applications (1967) you will need 1 1/8 inch shaft 3524-52A and coupler 3A525-52A.
Additionally some installations may require longer power steering hoses 3A719-50A which are lengthened an additional 6”. 5.0L conversions an additional hose 3A719-50C will be required. Ford pump uses Motorcraft type F fluid NPD# F-19582-2. Saginaw pump uses GM AC Delco NPD# C-0088-01 fluid.
You must flush the PS system anytime components are replaced to eliminate any contamination and to validate manufacturers warranties. Many transmission fluids available on the market do not meet manufacturer minimum standards for friction, viscosity, corrosion or wear. In fact Cardone, the largest supplier of rebuilt power steering components, has found the cause of many power steering related failures can be traced back to low quality fluid. Don’t risk your restoration on a budget brand fluid. We carry both Motorcraft Type “F” and GM AC Delco brand power steering fluids.
Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 3504-52B Manufacturer Reference #'s: 999025,
Product Instructions and Additional Info:
Power Steering Conversion Kit Installation Instruction1967-1967 MUSTANG 200, 250, P/S, 1 1/8 INCH DIAMETER SECTOR SHAFT, LONG SHAFT BOXES REQS 3524-52A & 3A525-52A
1968-1970 MUSTANG 200, 250, P/S
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
