RADIATOR, Aluminum, by Champion, 2 rows of 3/4 inch tubes, good to 400 HP, high density core, all aluminum, higher fin count, 100% TIG welded no epoxy, limited lifetime manufacturer warranty, 16 1/2 inch wide x 19 1/2 inch tall, 3 inch wide tank, 1.75 inch core, 1 1/2 inch inlet, 1 3/4 inch outlet, US-made, Note that installing a radiator that is thicker than original may reduce the clearance between the radiator and the cooling fan blades, Make sure you verify before running your engine, A minimum clearance of 1/2 inch is required with 1 inch preferred, The use of a different length of fan spacer can easily remedy this, ** Aluminum radiators and heater cores require coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion **
Received this radiator, and there were several issues 1) it wasnt flat and when placed on a floor it had almost a half inch of wobble. 2) the bottom outlet is poorly formed and can leak pretty easily, 3) the mounting holes and bracketry dont really line up well, so my new shroud doesnt actually fit well, and my fan rubs the shroud. pretty poor product
Submited on April 03, 2016 by christian r.