RADIATOR, Aluminum by Champion Cooling, 3 row, 5/8 inch tubes, 180 cores, 14 fins per inch, 24 /4 inch core width x 16 1/2 inch core height x 2 1/4 inch core thickness, inlet 1 1/2 inch RH, outlet 1 3/4 inch RH, 6 inch trans cooler, saddle mount, US-made, good to 650 HP, high density core, all aluminum, higher fin count, 100% TIG welded no epoxy, limited lifetime manufacturer warranty, , Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2 clearance (1 preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67s using 24 extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
Manufacturer Reference #'s: CC338,