2 row, 1” tubes, 82 cores, 16 fins per inch, 16 1/4” core width x 16 1/2” core height x 3” core thickness, inlet 1 1/2” RH, outlet 1 3/4” RH, 6” trans cooler, front mount.
High efficiency core, OE style stamped and polished tanks. OE mounting, 100% TIG welded no epoxy used anywhere, Lifetime manufacturers warranty. The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row. Drain cock is included and a factory fan shroud for the same application will fit.
See 8149-1A for fan shroud brackets and 8006-1K, 8006-1AK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer, a different fan or an electric fan. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine!
Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
** Note: Fastening of fans or other accessories to the radiator through the core will VOID any warranty. **
** Note: Cold Case requires customers to contact them directly for any radiator defects or warranty claims. Do not return any product to NPD. **
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1963 (63), 1964 (64), 1965 (65)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-3CA Manufacturer Reference #'s: FOM564A,
1965-1966 MUSTANG 260, 289, A/T
1963-1965 FALCON 260, 289, A/T
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Fits good,looks good
Submitted on May 08, 2020 by Chris C.
YES I would recommend this product.
Quality
Value
This radiator fit perfectly and was a replacement for an old 4 core I had in the car. With the added shroud, this one is cooling better than the old 4 core. The only issue I had was the suggested shroud brackets are too short to work with this radiator. I had to fabricate my own way to mount the shroud.
Submitted on August 08, 2023 by Troy D.
YES I would recommend this product.
Quality
Value
Radiator came as described and I have fitted it , all good Thankyou
Submitted on August 24, 2023 by hedley r.
YES I would recommend this product.
Quality
Value