RADIATOR, Aluminum, Cold Case by Max Performance, 2 row, 1 1/4 inch tubes, 82 cores, 16 fins per inch, 19 5/8 inch core width x 16 1/2 inch core height x 2 1/4 inch core thickness, inlet 1 1/2 inch RH, outlet 1 3/4 inch RH, front mount, High efficiency core, OE style stamped and polished tanks, OE mounting, 100% TIG welded no epoxy used anywhere, Lifetime manufacturers warranty, The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row, drain cock is included and a factory fan shroud for the same application will fit,Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2 clearance (1 preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67s using 24 extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
Manufacturer Reference #'s: FOM561,