RADIATOR, Aluminum, Cold Case by Max Performance, high efficiency, 17.5 inch core height, 24.0 inch core width, 2.2 inch thick, 2 rows of 1 inch tubes, 16 fins per inch, OE style stamped and polished tanks, OE mounting, 100% TIG welded no epoxy used anywhere, Lifetime manufacturers warranty, The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row, drain cock is included and a factory fan shroud for the same application will fit, Note that installing a radiator that is thicker than original may reduce the clearance between the radiator and the cooling fan blades, Make sure you verify before running your engine, A minimum clearance of 1/2 inch is required with 1 inch preferred, The use of a different length of fan spacer can easily remedy this, ** Aluminum radiators and heater cores require coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion **, ** ALL guarantees and warranties are handled directly through the manufacturer **
Manufacturer Reference #'s: FOM588,
Second One I bought, First one in 67 Fastback, 347 stroker, Florida heat, stuck in traffic, ac on car stays cool, building 70 mach 1 changed to cold case radiator.. highly recommend !!
Submited on September 13, 2019 by Bill M.
YES I would recommend this product.