RADIATOR, Aluminum Max Core by ACP, 2 row, 1 1/4 inch tubes, cores, 16 fins per inch, 17 inch core width x 16 1/2 inch core height x 2 5/8 inch core thickness, inlet 1 1/2 inch RH, outlet 1 3/4 inch RH, 6 inch trans cooler, front mount, OE style tanks instead of plain gives these radiators an original look with the super efficiency of a large tube aluminum radiator, OE mounting, 100% TIG welded and soldered, no epoxy used anywhere, 1 year manufacturers warranty, Extremely efficient, See 8149-1A for fan shroud brackets and 8006-1K, 8006-1AK for mounting hardware options, Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting, Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum, ** ALL guarantees and warranties are handled directly through the manufacturer **
NPD Part Number : 8005-4CA Manufacturer Reference #'s: FM-ER201,
1965-1966 MUSTANG 260, 289
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Very nice radiator. You have to tweak your transmission lines since the radiator is about an inch and a quarter thicker.
Submitted on April 21, 2020 by Michael S.
YES I would recommend this product.
Quality
Value
Super nice radiator
Submitted on April 24, 2020 by Michael S.
YES I would recommend this product.
Quality
Value
The radiator was drop in, and bolt on. So it was an easy install, and looks great. The only issue I had was with the drain valve. It was seized and would not open. Turns out that the internal valve was coated with nylon tape and would not open. Good thing I checked before installing the unit. I used the valve from the old radiator, so no problems
Submitted on August 08, 2022 by Marc M.
YES I would recommend this product.
Quality
Value
In Stock!
