RADIATOR KIT, Aluminum, Cold Case by Max Performance, radiator with custom aluminum fan shroud and 16 inch electric fan, high efficiency, 16.5 inch core height, 16.25 inch core width, 2.5 inch thick, 2 rows of 1.25 inch tubes, 1 1/2 inch RH inlet, 1 3/4 inch RH outlet, 16 fins per inch, 8 inch trans cooler, Stamped and polished tanks, OE mounting, 6 3/4 inch total thickness from the radiator support mounting flange, 100% TIG welded no epoxy used anywhere, ** Package requires 6.75 of clearance measured from the core support radiator mounting flange rearward, ** Lifetime manufacturers warranty, The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row, drain cock is included and a factory fan shroud for the same application will fit, Electric fan relay harness sold separately, see 8K621-1CCA, Note that installing a radiator that is thicker than original may reduce the clearance between the radiator and the cooling fan blades, Make sure you verify before running your engine, A minimum clearance of 1/2 inch is required with 1 inch preferred, The use of a different length of fan spacer can easily remedy this, ** Aluminum radiators and heater cores require coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion **, ** ALL guarantees and warranties are handled directly through the manufacturer **
Manufacturer Reference #'s: Cold Case Radiators 8005-3CAK,
I installed this radiator kit into a 1965 mustang with 289. This did not fit with shroud due to clearance between fan and water pump pulley. Even with the shroud removed it is a tight fit.
Submited on June 16, 2020 by Viola E.
YES I would recommend this product.