REGULATOR, Instrument Voltage, electronic replacement, no adjustments necessary, more reliable than the original relay style regulator, output is a constant 5 volts as required, Patents pending, 90 day manufacturer warranty, ** battery MUST be disconnected prior to installation **
Manufacturer Reference #'s: National Parts Depot 10804-1E, B7A-10804-B, B9MZ-10804-B, B9MZ-10804-C, C5VF-10804-B, GR-507
Product Instructions and Additional Info:
Instruction Sheet1965-1968 MUSTANG ELECTRONIC REPLACEMENT
1967-1968 COUGAR ELECTRONIC REPLACEMENT
1960-1968 FALCON
1964-1968 FAIRLANE FAIRLANE, TORINO
1969-1969 FAIRLANE FAIRLANE, TORINO, W/ TACH
1957-1957 TBIRD
1957-1969 F100-F350 ELECTRONIC REPLACEMENT
1966-1979 BRONCO ELECTRONIC REPLACEMENT
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This constant voltage regulator woks much better than the non-solid state unit which I used before. gauges work perfect, no erratic movement. I would definately rec. upgrade to this solid state version.
Submited on August 14, 2018 by Ken F.
YES I would recommend this product.
Quality
Value
its what he needed
Submited on September 08, 2018 by sam m.
YES I would recommend this product.
Quality
Value
Purchased two of these units. First one failed in 10 minutes. Thought I may have had a severe voltage surge from charging system. All checked fine, 14.4 volts. Ordered another< failed within 20 minutes. Found an NOS unit still in the box for the same price. Works great. You decide.
Submited on September 10, 2018 by Ken F.
Quality
Value
I installed both regulators at the same time. The temperature and gas gauges worked great for about 15 minutes and then stopped working. I installed per the instructions. I checked the mounting and connections and still get the same results. Maybe I didn't get something right. Will have to re-check.
Submited on April 21, 2019 by Don S.
YES I would recommend this product.
Quality
Value
Submited on July 25, 2019 by Ron f.
YES I would recommend this product.
Quality
Value
Submited on August 20, 2019 by Jerry W.
YES I would recommend this product.
Quality
Value
Chose to go with the Electronic Regulator upon replacing every Electrical Harness and Wiring Feed(s) in my '66 Coupe. Rather pricey, but...so far so good!
Submited on December 25, 2019 by Blaine W.
YES I would recommend this product.
Quality
Value
Installed per instructions and used the screw provided. Never worked. Fuel would read when ignition was turned on, but when car was started, fuel and all other gauges wouldn’t work. Contacted NPD, waiting on a reply.
Submited on January 07, 2021 by Brent H.
Quality
Value
solved my problem of gauges all reading low.
Submited on April 06, 2021 by Dan G.
YES I would recommend this product.
Quality
Value
Product works as it should. Although it doesn’t mount in same location as original it was a basic install but wish there was pictures so that I knew exactly where and how new install went.
Submited on May 02, 2021 by Tony S.
YES I would recommend this product.
Quality
Value
In Stock!
