SEAL STRIP, Glass Channel, 3/64 inch thick x 1 1/2 inch wide x 4 foot long, thinner version of 214A10-1, Ford seems to have used both thicknesses, Windows require about 40 inch, vent windows 28 inch
NPD Part Number : 214A10-2A Manufacturer Reference #'s: 21478
1965-1973 MUSTANG
1979-1979 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1964-1971 FAIRLANE FAIRLANE, TORINO
1955-1957 TBIRD
1948-1979 F1-F350
1980-1996 F100-F350
1997-2004 F150-F350
1966-1996 BRONCO
1967-1981 CAMARO
1964-1987 CHEVELLE
1967-1981 FIREBIRD
1962-1979 NOVA
1964-1972 TEMPEST GTO, TEMPEST, LEMANS
1947-1998 CHEVY TRUCK
1964-1988 CUTLASS
1964-1972 SKYLARK
1960-1976 MOPAR
1983-2004 R/B/E/M
1970-1970 FALCON (FROM 1/1/70)
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
If you are rebuilding your 60's vent windows (or replacing the vent glass into the vent frame) this item is NOT EXACTLY what you want! It is not thick enough. When doubled up, it did work out just about right. I was able to tap the glass back into the frame and the doubled rubber secured it properly. Ideally, we need material that is just at or under 6/64" for a proper, tight fit.
Submitted on May 13, 2019 by Gary B.
YES I would recommend this product.
Quality
Value
Product is as stated. Worked great. Service was great. Very friendly staff.
Submitted on December 19, 2019 by Gilbert T.
YES I would recommend this product.
Quality
Value
Worked great for vent window seal.
Submitted on January 12, 2020 by Jon H.
Quality
Value
Hard to find part, this was exactly what I needed to mount the vent windows and door windows in their frame.
Submitted on May 19, 2020 by Dick E.
YES I would recommend this product.
Quality
Value
Worked as described.
Submitted on May 26, 2020 by Nicholas A.
YES I would recommend this product.
Quality
Value
Submitted on July 11, 2020 by mark f.
YES I would recommend this product.
Quality
Value
Ordered both sizes...not a tight fit to the glass !
Submitted on April 09, 2021 by Desmond O.
YES I would recommend this product.
Quality
Value
Very good seal for the vent window. Would order it again if I need it.
Submitted on May 26, 2021 by Charles M.
YES I would recommend this product.
Quality
Value
Works good
Submitted on July 19, 2021 by Tom H.
YES I would recommend this product.
Quality
Value
Exactly the right product to set vent window glass into its frame! Works well, one 4 foot strip did two vent windows on my 67 Mustang fastback.
Submitted on February 16, 2022 by Bob B.
YES I would recommend this product.
Quality
Value
I bought 2 sizes as I wasn't sure which would be needed. This size was a better fit then the 1/16" for my 55 F-100. I sorta wish one side had a sticky surface to help hold it on to the glass.
Submitted on February 07, 2023 by Richard B.
YES I would recommend this product.
Quality
Value
Worked out great
Submitted on May 04, 2023 by MICHAEL C.
YES I would recommend this product.
Quality
Value
The 1/16” held better
Submitted on July 09, 2023 by David R.
YES I would recommend this product.
Quality
Value
Wonderful product, working great
Submitted on August 02, 2023 by CHARLES L.
YES I would recommend this product.
Quality
Value
In Stock!
