TOOL, Brake Pressure Differential Switch, steel, 3/8 inch-24 thread, This tool is used to keep the piston centered while bleeding the brakes, ** Not for use while vehicle is being operated! **, Note that this will keep a valve centered while bleeding but it will not center a valve that is not already centered, Do not force this tool to screw into the block, Visually check to make certain the valve is centered prior to installing this tool, **
NPD Part Number : 914-7 Manufacturer Reference #'s: brake-valve-tool-1,
1968-1973 MUSTANG
1967-1973 COUGAR
1967-1979 F100-F350
1980-1996 F100-F350
1967-1996 BRONCO
1947-1998 CHEVY TRUCK
1960-1970 FALCON (BEFORE 1/1/70)
1964-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
definitely needed for 70 disc brake bleeding- did the trick
Submitted on June 10, 2019 by david s.
YES I would recommend this product.
Quality
Value
Great tool that will prevent you from having to crack your fittings to reset the brake light after bleeding.
Submitted on October 06, 2019 by Antonio H.
YES I would recommend this product.
Quality
Value
works as described- handy to have when working on brakes.
Submitted on May 24, 2020 by frank S.
YES I would recommend this product.
Quality
Value
Handy tool and cheaper than available locally.
Submitted on June 06, 2020 by Larry H.
YES I would recommend this product.
Quality
Value
Just the tool for bleeding old ford brakes. Easy ordering, fast shipping. I Would recommend this made it easy.
Submitted on July 07, 2020 by Michael B.
YES I would recommend this product.
Quality
Value
Submitted on July 09, 2020 by mark f.
YES I would recommend this product.
Quality
Value
Submitted on September 17, 2020 by Tony N.
Quality
Value
Ok
Submitted on November 09, 2020 by andrew s.
YES I would recommend this product.
Quality
Value
Submitted on November 11, 2020 by Hector B.
YES I would recommend this product.
Quality
Value
Worked as advertised to bleed brakes.
Submitted on January 19, 2021 by Thomas R.
YES I would recommend this product.
Quality
Value
A definite necessity when adding proportional valve and bleeding brakes..5 minutes to install and save hrs on the job if valve sticks to one side or other..
Submitted on February 06, 2021 by John D.
YES I would recommend this product.
Quality
Value
I have been looking for this as a replacement I lent to someone decades ago. The tool is essential to prevent the differential switch from moving and turning on the dashboard warning light while bleeding the dual brake setup on late 60's and early 70's Fords. Have not yet used it but is quite similar in appearance to the KD Tool I had years ago.
Submitted on February 11, 2021 by Robert P.
YES I would recommend this product.
Quality
Value
Submitted on March 16, 2021 by Derek J.
YES I would recommend this product.
Quality
Value
Works as designed
Submitted on April 08, 2021 by Lyle H.
Quality
Value
Works great
Submitted on April 11, 2021 by Lyle H.
YES I would recommend this product.
Quality
Value
useful part
Submitted on December 22, 2021 by Ing. J.
YES I would recommend this product.
Quality
Value
Submitted on May 11, 2022 by tracy t.
Quality
Value
It works, great quality
Submitted on June 28, 2022 by Francis L.
Quality
Value
Worked Great on my 68 Mustang, with stock positioning valve.
Submitted on July 16, 2022 by Terry E.
YES I would recommend this product.
Quality
Value
This tool fit perfect and worked as it was suppose to
Submitted on October 10, 2022 by Randy S.
YES I would recommend this product.
Quality
Value
Fits perfect. Shipping cost was 2x more than others on eBay. It worked and that is what was most important.
Submitted on November 18, 2022 by David P.
Quality
Value
Submitted on March 14, 2023 by Edward R.
YES I would recommend this product.
Quality
Value
Works as advertised, makes flushing and bleeding of the entire system easy. Used on a 74Triumph TR-6
Submitted on June 15, 2023 by David M.
YES I would recommend this product.
Quality
Value
I used this to keep my distribution block piston on center, in my 67 LTD.,
Submitted on September 04, 2023 by Jonathan f.
YES I would recommend this product.
Quality
Value
In Stock!