DAMPER ASSY, CRANKSHAFT, FORD PERFORMANCE, M-6316-A50, 50 OUNCE BALANCED, BILLET STEEL CONSTRUCTION, ELASTOMER STYLE HARMONIC VIBRATION DAMPER, SFI APPROVED, SEE ONLINE FOR MORE DETAILS
If you are looking to keep your engine properly balanced and are wanting to go above and beyond the factory style unit, then picking up one of these Ford Performance billet steel balancers is just the ticket. This harmonic balancer features the Ford Performance part number M-6316-A50 and is designed to fit 1981-1995 302 engines with the factory 50oz imbalance unit. Each unit features an engraved logo and a clear powdercoated finish. So, if you are looking to take your engine build to the next level or if your are tired of replacing your factory unit due to high horsepower look at picking up one of these units from NPD today!
Harmonic Balancer Features and Options:
-Ford Performance Crankshaft Dampers are used on most Ford Performance Pushrod Crate Engines
-Billet steel construction, meets SFI 18-1 requirements
-Elastomer style harmonic vibration damper
-Laser etched timing marks and Ford Racing logo
-3 and 4 bolt pulley mounting holes
-Clear powdercoat finish
Note:
Damper has removable weight that allows use as a neutral balance unit for internally balanced crankshafts. 1994-01 Mustang and Explorer requires modification. Does not clear early timing chain cover with rear installed seal. 3.000-inch. overall length. Passenger side 11-o'clock timing marks only.
Installation Note:
The 302 engine family has used many different styles of crankshaft dampers with various pulley spacings and bolt hole combinations. Ford Racing offers pulley spacers to properly position the crank pulley. Please check installation instruction PDF chart for proper pulley spacer. See NPD partt numbers M-8510 for correct spacers.
The M-6316-A50 crankshaft damper is a 50 oz imbalance unit designed for externally balanced 302 V-8s 1981 and newer. If you have a modified engine check with engine builder for proper balancer needed.
Water pump and timing cover front seal may need to be removed prior to installation. Check instructions for more details.
Ford Mustang Years:
1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95)
NPD Part Number : M-6316-50FR Manufacturer Reference #'s: M-6316-A50
1981-1993 MUSTANG 5.0L, W/ FACTORY 50OZ HARMONIC BALANCER
1994-1995 MUSTANG 5.0L, W/ FACTORY 50OZ HARMONIC BALANCER
0-0 SOME MUSTANGS WILL REQUIRE MODIFICATION TO INSTALL
0-0 ORIGINAL FACTORY ENGINES USED A 50OZ UNIT
1965-1973 MUSTANG 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1967-1973 COUGAR 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1960-1970 FALCON (BEFORE 1/1/70), 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1970-1970 FALCON (FROM 1/1/70), 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1964-1970 FAIRLANE 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1968-1971 TORINO 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1948-1979 F1-F350 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1980-1996 F100-F350 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
1966-1996 BRONCO 5.0L ENGINE CONVERSIONS WITH FACTORY 50 OZ IMBALANCE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
