HEAD GASKET SET, FORD PERFORMANCE, M-6051-C51, STANDARD STYLE, 4.00 INCH BORE DIAMETER, 4.100 INCH GASKET DIAMETER, .047 INCH COMPRESSED THICKNESS, 10.169CC COMPRESSED VOLUME, SEE ONLINE FOR MORE DETAILS
If you are looking for the correct cylinder head gaskets for your 302/351W engine with Ford high performance engines, then this set from Ford Performance is just the ticket. This set of cylinder head gaskets features the Ford Performance part number M-6051-C51 and features a 4.00 Bore Diameter, 4.100 Gasket Diameter, .047 Compressed thickness and a 10.169cc Compressed Volume. So, if these gaskets fit your engine build project, look at picking up a set from NPD today!
Manufacture Note:
Pushrod 302 and 351 Ford high performance engines
Installation Note:
Several different water hole patterns have been used on 302 and 351W Ford Performance cylinder blocks and heads since their introduction. Engine assemblers should lay the head gasket on the block and the cylinder head (with front of gasket toward the front of the engine) to make sure there is a path for coolant flow from the block into the head. In some cases, holes may have to be drilled in the block or head, or punched in the gasket.
Emission Note:
This part is intended as a replacement part for use only in the application(s) identified in the product description. Installation of this part in a vehicle for which it is not intended may violate U.S. and Canadian laws and regulations related to motor vehicle emissions.
NPD Part Number : M-6051-51C Manufacturer Reference #'s: M-6051-C51
0-0 FORD 302/351 FORD HIGH PERFORMANCE ENGINES
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Out of Stock
