Ford Performance 347 Cubic Inch BOSS Short Block (M-6009-347)

FORD PERFORMANCE 347 CUBIC INCH BOSS SHORT BLOCK, M-6009-347, FORGED MAHLE PISTONS, SCAT FORGED STEEL CONNECTING RODS, BOSS 4 BOLT MAIN BLOCK, SCAT FORGED STEEL CRANKSHAFT, SEE ONLINE FOR MORE DETAILS

If you are looking to start your engine build off in the right direction then picking up one of these short block packages for your Mustang or Ford vehicle is just the place to start. This short block features the Ford Performance part number M-6009-347 and is designed to add power and performance to your Ford. This short block is designed to help save you money and time by putting the right parts together to ensure a long lasting engine. So, if you already have your heads and camshaft and other components ready to go then look at picking up one of these short blocks from NPD today!

*** All Ford Performance short blocks are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Manufacture Note:

The Ford Performance 347 shortblock lets you build it your way by adding your choice of heads, cam, intake and oil pan. It's the perfect foundation to build a powerful 8.2" deck engine for your vintage muscle car, street rod, Fox Body or Late Model Mustang. This is the same shortblock used in the 347 sealed racing crate engines, Part numberM-6007-D347SRandM-6007-S347JR. Nothing but the best parts are used inside including: forged crankshaft, forged I-beam connecting rods with floating piston pins and the BOSS 302 block.

Engine Features and Options:
-Engine type:302 based small block Ford
-Displacement (cu in):347
-Bore x stroke (in):4.030" bore x 3.400" stroke
-Block: Boss 4-bolt main blockM-6010-BOSS302 8.2" deck height
-Piston to Deck Height: .010" below deck (nominal)
-Crankshaft: SCAT Forged Steel: 3.400" stroke
-Connecting rods:SCAT forged steel I-beam connecting rods with floating pin and ARP bolts
-Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, Z2, X2 and other inline valve Windsor cylinder heads.6 cc valve pockets.Check piston to valve clearance.
-Hydraulic roller camshaft compatible

Installation Note:

See engine installation and tuning tips below. Some or all of the following items may need to be changed from your original engine or modified for proper installation:
-Internally balanced. Requires 0 balance flywheel and damper
-Recommended cylinder head fastenersM-6065-BOSShead bolts orM-6014-BOSSstuds depending on application
-Most aftermarket performance cylinder heads are compatible with this short block. Ford Performance short blocks are built with pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines.
-Works well with Ford Performance cylinder headsM-6049-Z2andM-6049-X2
-Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads
-Assembled and ready for your heads, cam and timing chain set
-Requires head gasketsM-6051-CP331orM-6051-S331
-High-performance harmonic balancerM-6316-D302is recommended
-High volume oil pump M-6600-D2recommended
-302 bolt pattern, oil pan and timing cover
-Built with all NEW PARTS
-Photo and specs may vary

Emissions Note:

This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6009-347A
Manufacturer Reference #'s: M-6009-347