FUEL CAP, Vented, replacement style, anti-surge, 2.47 inch diameter, Vented, For use under pop open fuel caps Cap may or may not have ears, See 9030-2K, 9030-2AK, 9034-1CK for mounting kit options,
NPD Part Number : 9030-5 Manufacturer Reference #'s: FDM1088AA, C7AZ-9030-A, FC-40
1967-1973 MUSTANG WITH REPLACEMENT STYLE POP-OPEN GAS CAPS
1969-1970 MUSTANG SHELBY, W/O EVAPORATIVE EMISSIONS
1967-1969 COUGAR
1970-1970 COUGAR W/O EVAPORATIVE EMISSIONS
1966-1970 FALCON (BEFORE 1/1/70), BODY 71 (4DR STATION WAGON)
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This gas cap is supposed to be vented. It is only vented for pressure. The spring loaded valve will allow pressure out but not allow air in when a vacuum exists. This is unacceptable and and could lead to many problems if it is the only vent to the tank. Drill several 3/32” holes just to the side of the center spring loaded valve. It will then transfer air in both directions.
Submitted on May 28, 2019 by Marty M.
YES I would recommend this product.
Quality
Value
The cap I received does not look anything like the picture.But who cares does it Fit Yes. Make sure your filler neck has the small indent where the fuel cap attaches so it can breath in and out,If the filler neck does not have the indent it will not vent and pressure will build in the tank.The N.P.D. reviews are great and always helpful.You sometimes have figure out if the part will work for you and your intention. Thanks N.P.D.
Submitted on April 29, 2024 by James S.
YES I would recommend this product.
Quality
Value
In Stock!