GASKET, Exhaust Manifold, replacement, to inlet pipe, 2 inch I.D.
NPD Part Number : 9450-16A Manufacturer Reference #'s: NI13017A, C6AZ-9450-D
1965-1966 MUSTANG 260, 289, W/ SINGLE EXHAUST
1967-1967 MUSTANG 200, 289-2V, W/ SINGLE EXHAUST
1968-1973 MUSTANG 200, 250, 289, 302, W/ SINGLE EXHAUST
1965-1968 MUSTANG 289, 302, 390, 428, W/ 2 INCH DUAL EXHAUST, 2 REQD
1969-1969 MUSTANG BOSS 302, WITH ORIGINAL H-PIPE
1968-1968 COUGAR 289-2V, 302-2V, SINGLE EXHAUST
1968-1968 COUGAR 289, 302, GT-E, 427, DUAL EXHAUST, 2 REQD
1969-1969 COUGAR ELIMINATOR, BOSS 302, 2 REQD
1963-1964 FALCON 260
1965-1968 FALCON 289, 2 REQD
1967-1967 FALCON (FROM 11/14/66), 170, 200, C4, W/ EMISSIONS, 1 REQD
1968-1970 FALCON (BEFORE 1/1/70), 170, 200, 1 REQD
1968-1970 FALCON (BEFORE 1/1/70), 302, 2 REQD
1964-1967 FAIRLANE 289, 390, 2 REQD
1967-1967 FAIRLANE (FROM 11/14/66), 200, C4 W/ EMISSIONS, 1 REQD
1970-1971 TORINO 250, 302, 1-2 REQD
1965-1966 F100 4X2 6 CYL., 114 INCH OR 129 INCH WHEELBASE
1969-1972 F100 4X2 302, 114 INCH OR 129 INCH WHEELBASE, 2 REQD
1973-1974 F100 4X2 240, 117 INCH OR 133 INCH WHEELBASE
1975-1978 F100 4X2 300, 117 INCH OR 133 INCH WHEELBASE, W/ CONVERTOR
1975-1978 F100 4X2 302, 117 INCH OR 133 INCH WHEELBASE, W/ CONVERTOR, 2 REQD
1979-1979 F100 4X2 302, 116 INCH OR 133 INCH WHEELBASE, W/ CONVERTOR
1979-1979 F100 4X2 6 CYL., 117 INCH OR 133 INCH WHEELBASE, W/ CONVERTOR
1965-1966 F100 4X4 6 CYL.
1967-1972 F100 4X4 6 CYL.
1973-1974 F100 4X4 6 CYL., TO MUFFLER
1975-1975 F150 4X2 (FROM SERIAL# V80,001), 6 CYL., 133 INCH WHEELBASE
1976-1978 F150 4X2 6 CYL., 133 INCH WHEELBASE W/O CONVERTOR, 117 INCH OR 133 INCH WHEELBASE
1977-1978 F150 4X2 302, 138 INCH WHEELBASE, W/O CONVERTOR, 2 REQD
1978-1978 F150 4X2 302, 133 INCH WHEELBASE, W/ CONVERTOR, 2 REQD
1979-1979 F150 4X2 300, 133 INCH WHEELBASE, W/ CONVERTOR
1979-1979 F150 4X2 302, 116 INCH, 133 INCH, 138 INCH OR 155 INCH WHEELBASE, W/ CONVERTOR, 2 REQD
1975-1976 F150 4X4 6 CYL., 116 INCH OR 133 INCH WHEELBASE, W/O CONVERTOR
1977-1977 F150 4X4 300, 116 INCH OR 133 INCH WHEELBASE, W/O CONVERTOR
1978-1978 F150 4X4 6 CYL., 116 INCH OR 133 INCH WHEELBASE, W/O CONVERTOR
1979-1979 F150 4X4 6 CYL., 117 INCH OR 133 INCH WHEELBASE, W/ CONVERTOR
1965-1966 F250 4X2 6 CYL., ROUND TYPE, 1 REQD
1967-1972 F250 4X2 6 CYL.
1973-1975 F250 4X2 (BEFORE 75 SERIAL# V80,001), 6 ., 133 INCH WHEELBASE
1973-1975 F250 4X2 (BEFORE 75 SERIAL# V80,001), 6 CYL., 150 INCH WHEELBASE
1975-1977 F250 4X2 (FROM 75 SERIAL# V80,001), 6 CYL., 133 INCH OR 155 INCH WHEELBASE
1978-1978 F250 4X2 6 CYL., 133 INCH WHEELBASE, W/O CONVERTOR
1979-1979 F250 4X2 6 CYL., 133 INCH WHEELBASE, W/ CONVERTOR
1965-1966 F250 4X4 6 CYL.
1967-1967 F250 4X4 6 CYL., EXCL CAMPER AND RANGER, 1 REQD
1968-1972 F250 4X4 6 CYL.
1973-1975 F250 4X4 (BEFORE 75 SERIAL# V80,001), 300, 133 INCH WHEELBASE
1974-1975 F250 4X4 (BEFORE 75 SERIAL# V80,001), 300, 150 INCH WHEELBASE
1979-1979 F250 4X4 300, 133 INCH WHEELBASE, W/ CONVERTOR
1967-1969 F350 4X2 6 CYL.
1970-1972 F350 4X2 6 CYL.
1973-1975 F350 4X2 (BEFORE 75 SERIAL# V80,001), 300, 166 INCH WHEELBASE
1975-1975 F350 4X2 (BEFORE SERIAL# V80,001), 300, 136 INCH, 140 INCH, 160 INCH WHEELBASE
1966-1974 BRONCO 289, 302
1970-1970 FALCON (FROM 1/1/70), 250, 302, 1-2 REQD
1968-1968 TORINO 200, 1 REQD
1969-1969 TORINO 250, 302, 390, 1-2 REQD
1968-1968 TORINO 289, 302, 390, MANIFOLD TO INLET PIPE, 2 REQD
1968-1968 FAIRLANE 200, 1 REQD
1969-1969 FAIRLANE 250, 302, 390, 1-2 REQD
1968-1968 FAIRLANE 289, 302, 390, MANIFOLD TO INLET PIPE, 2 REQD
1967-1981 CAMARO
1964-1987 CHEVELLE CHEVELLE, EL CAMINO, AND MALIBU
1970-1980 FIREBIRD
1962-1979 NOVA
1964-1970 TEMPEST
1947-1986 CHEVY TRUCK
1969-1986 K5 BLAZER
1968-1980 CUTLASS
1968-1971 SKYLARK
1970-1980 MONTE CARLO
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on August 18, 2018 by Michael S.
YES I would recommend this product.
Quality
Value
Submitted on July 25, 2020 by milton p.
YES I would recommend this product.
Quality
Value
Seems to fit just fine. No issues.
Submitted on January 03, 2021 by Michael L.
YES I would recommend this product.
Quality
Value
A perfect fit for my '66 Mustang dual exhaust with HIPO manifold.
Submitted on October 09, 2021 by FRANK D.
YES I would recommend this product.
Quality
Value
Perfect Fit for my late-'66 with the new, OEM exhaust manifolds that I purchased years ago.
Submitted on November 23, 2023 by Blaine W.
YES I would recommend this product.
Quality
Value
In Stock!