CONTROL ARMS, FRONT, QA1, RACE STYLE, RH AND LH SIDE, INCL QA1 FORGED BALL JOINT HOUSING WITH LOW FRICTION BALL JOINT, ECCENTRIC ADJUSTMENT SLEEVE AND BUSHING, SWAY BAR MOUNTS, DESIGNED TO BE USED WITH COIL OVER FRONT STRUT SYSTEMS, GREAT FOR DRAG RACING OR AUTOCROSS DRIVING MUSTANGS
If you are looking for the best in performance front lower control arms for your Fox Mustang, these new Race style units from QA1 are just what you are looking for. These units are designed to not only offer substantial weight savings over factory control arms but also reduce unsprung weight all while improving weight distribution. So, if you are looking drag race or road race your mustang, look at picking up a set of these new units today!
Race Control Arms:
QA1's Mustang race control arms are the perfect combination of performance and style, offering lightweight, durable construction and a clean, sleek design that will enhance the look of your Mustang. QA1's unique eccentric adjustment sleeve allows for precise tuning of camber and up-to a 1/2 of track width adjustment without removing from the car, a feature not found in other control arms.
QA1s ultra-low-friction composite bushings are stiffer and provide bind-free movement, providing enhanced stability and control. They also allow for freer movement, resulting in a more responsive ride. Additionally, these bushings are much more durable than rubber bushings, making them highly resistant to wear and tear. Finally, composite bushings are greasable for long life.
A unique feature of the QA1 control arm is the forged ball joint housing. This provides exceptional reliability, strength, and durability. The low-friction ball joint ensures smooth operation, and the rebuildable, lightweight, and greaseable design makes maintenance a breeze.
QA1 race control arms were designed to be the strongest, best looking control arms on the market. And weighing in at less than 8lbs per arm, this makes them among the lightest of race worthy control arms available.
Product Notes:
These race control arms from QA1 do not feature the factory lower spring pockets and will require you to use a front coil over strut system. They are designed with a OE style Ball joint to ensure that they will work with not only QA1s coil over system but many aftermarket style system as well. All Foxbody control arms include adapters for SN95 spindles.
Installation Note:
These race style front control arms can be used with the factory front K-member or QA1s tubular style front K-member for even more added weight reduction. See NPD part number (M-5025-1QAB) for correct QA1 style. It is also recommend to upgrade your factory caster camber plates with either QA1s performance versions or some other type of aftermarket style.
Note:
If you are not looking for a all out race style front control arm see NPD part number M-3078-1QBS for QA1s street style front arms.
Ford Mustang Years:
1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)
NPD Part Number : M-3078-1QBR Manufacturer Reference #'s: 52540
1979-1993 MUSTANG W/ FACTORY OR QA1 K-MEMBER, REQUIRES COIL OVER STRUT SYSTEM
0-0 ** SEE ONLINE FOR MORE DETAILS **
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This item is made to order and is shipped directly from the manufacturer. Please allow 1-8 weeks for delivery. Currently, however, some manufacturers are requiring much longer lead times