.125” thick 304 stainless steel. Each. Laser cut.
Use to properly position the holes to relocate the upper control arms 1 inch lower as was done to the early Shelby GT-350.
Also known as the “Arning Drop” for Klaus Arning, a Ford Engineer, who originally planned the modification. Lowering the control arm will lower the front end approximately 5/8”, all other things being equal, but the true enhancement comes from the revised geometry of raising the roll center which acts like a sway bar and resists body roll. Additionally, this will maintain a flatter tire contact patch especially helpful with wider than original tires. Install with the notch pointed forward.
See 3T049-1ASK for our Drop plate kit that will allow you to leave the plates in place for a little extra reinforcement.
See instructions posted online for complete installation information.
Once completed you will need to align the front end with revised specs.
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1964 (64), 1965 (65)
Above years shown are used for searches and are not application listings.
1965-1966 MUSTANG
1964-1965 FALCON
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
